| For example：FS-61 |
-G |
-SP |
-A |
-S |
-K |
-A |
-R |
| Single pedal |
Guarding options |
Contact Block Type |
Special Features |
Switch Configuration |
option |
Conduit Type |
|
| |
blank:No Guarded |
SP: snap action |
blank |
blank:SPDT |
blank |
A: 1/2NPT |
WITH RESET FUNCTION |
| |
G: Fully Guarded |
SL:slow action
break before make
|
A: Anti-tripped |
T:DPDT |
K:Gold plated contactcs |
B:PG13.5 |
|
| |
|
SL1:slow action
make before break
|
|
S: 2 stages |
|
C:M20x1.5 |
|
Operating sequence:<br>
"OFF" Step 1:the pedal is not depressed.The contacts are open.The machine is turned off.<br>
"ON" Step 2:To start the machine,the pedal must be depressed until the "pressure point",where resistance is noticeable.<br>
"EMERGENCY-OFF" Step 3: In an emergency,if the pedal is depressed beyond the pressure point,the machine will stop.<br>
Beyond the pressure point,the contacts are locked in the "OFF:-Position.The machine cannot operate at
this time.Note:The machine can also be stopped,by releasing the pedal in stead of depressing harder (Black to step 1)<br>
"RESET" Step4: The push button on the side of the foot switch must be pushed by hand to enable the foot switch to start the machine function again.<br>
"ON" Step5:Return to condition described in Step 2.
